What a beautiful sight!!
-
Barrie2777
- Posts:1547
- Joined:Tue Mar 04, 2008 9:17 pm
- Location:Arundel Quebec
These are the tracks for my newly finished 444. Stainless cleats and nickle plated rivets . I am preparing for the vintage races the weekend before Alliston.. I'm hoping for a sunny day so I can blind my competition with sun reflected off the cleats. I doubt if Ed will come and hook up the dual carbs for me.
- Attachments
-
- stainless cleats on new belting 003 (Small).jpg (39.66KiB)Viewed 4455 times
-
- stainless cleats on new belting 002 (Small).jpg (54.38KiB)Viewed 4457 times
-
Red Devil 500
- Posts:182
- Joined:Sun Oct 10, 2010 9:25 pm
- Location:Finch,Ontario
Re: What a beautiful sight!!
What was the size and part number of the rivets??
Sean
Sean
502 Diablo
444 Hus Ski
1963 Autoboggen
1962 L55 Polaris
1972 Raider 290
1976 Peterbourgh 18'5ft 165
2007 Honda Rubicon 500
444 Hus Ski
1963 Autoboggen
1962 L55 Polaris
1972 Raider 290
1976 Peterbourgh 18'5ft 165
2007 Honda Rubicon 500
-
Barrie2777
- Posts:1547
- Joined:Tue Mar 04, 2008 9:17 pm
- Location:Arundel Quebec
Re: What a beautiful sight!!
Thought you might ask...Spaenaur RVT247 1/4" x 1-1/8" long. The rivetting worked great with the air gun and rivetting attachment. The most time spent was inserting the rivets with washers through the rubber. The rivets look soooo gooood not to mention all that stainless steel.
-
Go Go Diablo
- Site Admin
- Posts:1831
- Joined:Fri Feb 22, 2008 12:47 am
- Location:Sobieski, Wisconsin
- Contact:
Re: What a beautiful sight!!
More of those stainless steel cleats are on order. Hope to have them prior to Alliston.
Tracks look wonderful Barrie!
Bruce
Tracks look wonderful Barrie!
Bruce
Too many Diablos and parts to count.
Yamaha 600 SX
Yamaha 600 SX
-
rustybarnard440
- Posts:12
- Joined:Wed Oct 21, 2009 12:56 pm
Re: What a beautiful sight!!
were did you get the attachment for the rivets? Does it go in a air chisel to flare them out.
-
Barrie2777
- Posts:1547
- Joined:Tue Mar 04, 2008 9:17 pm
- Location:Arundel Quebec
Re: What a beautiful sight!!
I make the end to rivet them. It fits in an air hammer. $15 if you want one, about $70 from Spaenaur, the company which sells the rivets.
Re: What a beautiful sight!!
how heavy a buckin bar for the back side and was it dimpled?Barrie2777 wrote:Thought you might ask...Spaenaur RVT247 1/4" x 1-1/8" long. The rivetting worked great with the air gun and rivetting attachment. The most time spent was inserting the rivets with washers through the rubber. The rivets look soooo gooood not to mention all that stainless steel.