First I would like to thank everybody for their help and information. Finally finished up the restoration on a 600 tonite. It has been quite the experience between finding parts and going from "getting the engine running and leave it as is" to a full blown tear down restoration. This forum and the experience everybody shares is priceless. When I went to start the engine tonite ( last time it ran was 4 months ago) it would not start. I thought what the heck it always started in 2 pulls. Spark check, fuel check, then I remembered something I read, pulled off fuel line, shot of air, fired right up. Special thanks to Bruce and Barrie hopefully someday I will get to meet you.
Keep on riding everybody.
Another hus ski joins the ranks
- 1965 Hus-Ski
- Posts:32
- Joined:Thu Sep 10, 2015 6:48 pm
One piece at a time
- Barrie2777
- Posts:1547
- Joined:Tue Mar 04, 2008 9:17 pm
- Location:Arundel Quebec
Re: Another hus ski joins the ranks
Great news and congratulations. Have you sent Bruce a photo to add to the "friends and their diablo/husski " page?
- 1965 Hus-Ski
- Posts:32
- Joined:Thu Sep 10, 2015 6:48 pm
Re: Another hus ski joins the ranks
Took the hus ski out for a shake down run tonite to try to figure out why the choke keeps creeping out, I just have to put my finger on it to push it back in about an 1/8", ( any ideas why anybody?) On the way back to the shop my muffler came apart, I guess it's time to fix it right this time.
One piece at a time