No Time To Waste! 444 for Feb 12th!Get Set Go !

[Cooter]

In this forum I remember someone showing the differences in the fender from a 400 to I beleive a 444 and the 400 had an extra peice spotwelded on the underneath of the fender along the sides I think this would stiffen fender I wish I would have did this to mine before welding it on but I think it will still work ok

[RONOUE]

The 400 has an extra v strip welded under the pan along each side.. inline with the top bead...Have not see that on the 444s

[Red Devil 500]

Well just when you think you are done!The one thing driving me nuts was I could not find the rubber cover for the kill button on the motor of my Hus Ski 444.My buddy Andre found this we put it on folded inside out and a dab of clear silicone and BAM !!!!That was i fit great looks original.I will take a pic of it on this week end as it will be at a local show.But this is the part number and the part is a Briggs and Stratton primer bulb.Briggs #494408 ESF # 137-061

Sean

[Red Devil 500]

Here is a picture of the ruber cover for the kill switch on the engine.

[Red Devil 500]

Now just waiting for the fuel mixture decal and it is Done!! I think?

[Barrie2777]

That is a great finishing detail, Sean. That last thing everyone needs and cannot find.

[Red Devil 500]

Hey Barrie I forgot to get a fuel mixture decal from you.

[Barrie2777]

I am concidering going to the Peterborough show. Do you have any need to go in that direction?

[Red Devil 500]

When is that one?Are you showing or buying?

[Barrie2777]

Well just when you think you are done!The one thing driving me nuts was I could not find the rubber cover for the kill button on the motor of my Hus Ski 444.My buddy Andre found this we put it on folded inside out and a dab of clear silicone and BAM !!!!That was i fit great looks original.I will take a pic of it on this week end as it will be at a local show.But this is the part number and the part is a Briggs and Stratton primer bulb.Briggs #494408 ESF # 137-061

Sean