Page 1 of 1
444 Brake shaft
Posted: Mon Apr 04, 2011 2:09 pm
by Jano
I am looking for info on the 2 bearings that go on the jack shaft. Anyone know the dimension size or part number and where I can find them.
Also would like to have the same information on the 6 bearings in the 2 axles.
Any help would be appreciated.
Jeannot
Re: 444 Brake shaft
Posted: Mon Apr 04, 2011 3:08 pm
by huuksnatch
The Jackshaft bearings i have been useing are a Parts Master" part # 204FF. The axle bearings in a the parts master is 203FF. Hope this helps, if u have any problems finding them i could get u them for pretty cheap.
Re: 444 Brake shaft
Posted: Mon Apr 04, 2011 10:07 pm
by Barrie2777
I get 62042RS for the jackshaft and 62032RS for the rear axel. These are very common bearings.
Re: 444 Brake shaft
Posted: Tue Apr 05, 2011 10:40 am
by Jano
Thanks guys,
I should be able to get them, if not I'll get back to you.
Jeannot
Re: 444 Brake shaft
Posted: Tue Apr 05, 2011 10:44 am
by Jano
By the way,
anyone knows if there's an NOS jack shaft available out there. I would be interested.
Jeannot