Page 1 of 1
EXPANDED METAL 444
Posted: Wed Mar 17, 2010 3:32 pm
by huuksnatch
Hello, about to start the restoration on a 444 and was wondering if anyone knows where to get the correct expanded metal for the hood scope and the handle bars?? Thanks
-steve
Re: EXPANDED METAL 444
Posted: Fri Mar 19, 2010 3:57 pm
by fap67
The stuff I bought is close, but not exact. The size that I used is "1/4 No.18 Standard" or sometimes called "Raised". The 1/4 is the width of the diamond in inches. The 18 is the approximate gauge of the sheet. I ordered this stuff without seeing it. When I got it and compared it to the original stuff, I concluded that the original was probably 5/16", none of my steel catalogs list 5/16 so I don't know if it is available. The gauge thickness on my 200A's seems to be the same as the No.18, but the 444 uses a thinner gauge, probably No.20 . Flattened is available as opposed to the standard or raised, and seems to be more common but is definitely not what was used originally. As far as where to get it, check with the steel suppliers.