Page 1 of 1
Rubber Track
Posted: Mon Feb 22, 2010 4:19 pm
by ljhuuki
Hi all,
I am going to be rebuilding to track to my 444 soon and I was wondering if anyone knows where I can buy the rubber track??? Is it expensive stuff? Thanks for any info on this topic.
Re: Rubber Track
Posted: Mon Feb 22, 2010 8:52 pm
by Barrie2777
I buy this stuff here in Quebec. With shipping and material it may cost $300 for the rubber. I have talked to them about punching the holes and they are willing to that also but at additional charge.
Re: Rubber Track
Posted: Tue Feb 23, 2010 8:04 am
by duke
hi,Try any farm equipment dealer for belting. They should have good pricing as it is used in hay balers.
Re: Rubber Track
Posted: Tue Feb 23, 2010 8:12 am
by Barrie2777
The belting for hay balers usually has a grip pattern on one side but can be very inexpensive if you find someone who has just changed their belting. Original HUS-SKI belting was smooth on both sides.
Re: Rubber Track
Posted: Tue Feb 23, 2010 9:06 pm
by RONOUE
WE JUST BOUGHT ENOUGH FOR 5 MACHINES 4"&6" 5" FOR THE 444. THERE IS A GUY DOWNSTATE IN MAINE ONE OF THE LARGEST SUPPLIERS OF BELT ON EAST COAST MOST USED IN MINES QUARRIES. BUT I ENDED UP BUYING IT FROM A FRIEND WHO WORKS AT MOTION INDUSTRIES SUBSIDARY OF NAPA. USING 220 SERIES 1/8 X 1/16 X 5/16 THICK SMOOTH 2 PLY 2.65 FT
SLIT TO WIDTH NEW STOCK
*****WE ALSO ARE GOING TO RELAG 3 IN YELLOW UHMW POLY PRO WE BOUGHT DIRECT FROM THE EXTRUDER ALL CUT TO SPEC. ALSO WE HAPPEN TO SELL PRODUCTS TO A HARDWOOD MILL OWNED BY SEVEN ISLANDS. THEY PRODUCE KILN DRIED CLEAR CABINET/FURNITURE MAPLE. TOOK THE STICKERS USED BETWEEN THE ROWS OF BOARDS 1X1/3/4 X 7 FT PLANED & CUT TO EXACT SPECS 360 PCS COST US ABOUT $30 BUCKS.