hus-ski parts?

[snocatpete]

A friend of mine had these parts mixed in with a lot of his Hus-ski parts and he wasn't sure if they were Hus-ski parts or not. He asked me to post them on the forum to see if anyone else could positively identify them. I went through all the literature I have and could not identify them. Any help would be appreciated. This first set of pictures are of a cable (he has quite a few of these cables). He thought they might be prototype cables used eiher for throttle or brake for a Hus-ski.

[snocatpete]

This set of photos is of a bracket or set of brackets. Again he wasn't sure if this was a prototype part that was used on a Hus-ski itself or as a bracket of some sort to attach an accessory...?

[snocatpete]

In this last set of photos are of some brackets that are attached to the ski mounting brackets. a couple of years ago I acquired a 444 sled that had these brackets mounted on them. Up until then I had never seen these particular brackets on any model of Hus-ski. I thought they were home-made brackets that someone had put on there as a stop to prevent the ski from pivoting too far. After going through all my parts books and literature that I have, I was unable to identify this part as a factory part. Then a few months ago, my friend gave me an old pair of skis and they had the exact same brackets that were on my 444 sled skis I had acquired a few years earlier. So now two sets of skis from two different sources, both with the identical bracket, these cannot be home made parts. I just thought I would share this here on the forum so if anyone can identify these parts or provide part numbers or part descriptions, my friend and I would appreciate it. Thanks, Pete

[husskifan]

THE SKI BRACKETS THAT HAVE THE ADDED PIECE I HAVE SEEN BEFORE. I KNOW OF A HUS-SKI 444 THAT WAS A DEALER DEMO AND IS OF THE 652 SERIAL NUMBER SO ONE OF THE LATER UNITS AND IT IS ALL ORIGINAL AND HAS THESE ADDED PIECES.