Basement find/resorection

fap67 · Post by **fap67** » Sat Oct 22, 2011 4:24 pm

I guess while I was uploading my pictures, Sean posted and I didn't know it. Nice work on making that piece Sean.

Red Devil 500 · Post by **Red Devil 500** » Sat Oct 22, 2011 6:57 pm

Thanks Frank

Trailrider · Post by **Trailrider** » Sun Oct 23, 2011 3:09 am

Red Devil 500 wrote:Hi and welcome yes you are missing that piece I have made them buy hand I just went to an exhaust shop got a piece of pipe the diameter of the hole cut 1/4 past what you need and SLOWLY used the edge of my shop bench vise and peened the edge of the pipe.Worked great get two pieces of pipe went to fast first time and it split.SLOW!!!

Sean

Thanks Sean, based on the hole in the side of mine, it looks like it gets welded into place. Is it suppose to be painted black?

Trailrider · Post by **Trailrider** » Sun Oct 23, 2011 3:19 am

fap67 wrote:Here are some pictures to help show you what is missing.

Got it thanks, that sure did turn out nice.

Red Devil 500 · Post by **Red Devil 500** » Mon Oct 24, 2011 4:36 pm

I made mine just a bit smaller than the hole so i could get about 4 good tack welds from the back as not to be seen from the front.Yes it is to be black as well.But make sure you fit it,I made sure as i put the flange on mine that it fit in the hole only one way so the flange fit tight to the body all way around.

Sean

Bolens Diablo Rouge and Hus Ski Discussion Forums

Basement find/resorection

Re: Basement find/resorection

Re: Basement find/resorection

Re: Basement find/resorection

Re: Basement find/resorection