444 Brake shaft

A place to ask all your questions about Hus Skis or just a great place to spread a little of that Yellow Pride.
Post Reply
User avatar
Jano
Posts:105
Joined:Fri Dec 19, 2008 10:43 am
Location:Gatineau, Qc
444 Brake shaft

Post by Jano » Mon Apr 04, 2011 2:09 pm

I am looking for info on the 2 bearings that go on the jack shaft. Anyone know the dimension size or part number and where I can find them.
Also would like to have the same information on the 6 bearings in the 2 axles.
Any help would be appreciated.

Jeannot
Top
User avatar
huuksnatch
Posts:75
Joined:Fri Aug 01, 2008 1:19 pm
Location:Calumet MI

Re: 444 Brake shaft

Post by huuksnatch » Mon Apr 04, 2011 3:08 pm

The Jackshaft bearings i have been useing are a Parts Master" part # 204FF. The axle bearings in a the parts master is 203FF. Hope this helps, if u have any problems finding them i could get u them for pretty cheap.
-Steve
Top
User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec

Re: 444 Brake shaft

Post by Barrie2777 » Mon Apr 04, 2011 10:07 pm

I get 62042RS for the jackshaft and 62032RS for the rear axel. These are very common bearings.
Top
User avatar
Jano
Posts:105
Joined:Fri Dec 19, 2008 10:43 am
Location:Gatineau, Qc

Re: 444 Brake shaft

Post by Jano » Tue Apr 05, 2011 10:40 am

Thanks guys,
I should be able to get them, if not I'll get back to you.

Jeannot
Top
User avatar
Jano
Posts:105
Joined:Fri Dec 19, 2008 10:43 am
Location:Gatineau, Qc

Re: 444 Brake shaft

Post by Jano » Tue Apr 05, 2011 10:44 am

By the way,
anyone knows if there's an NOS jack shaft available out there. I would be interested.

Jeannot
Top
Post Reply

Return to “Questions & Discussions about Hus Skis”