need hus ski parts

[wallis1924]

hi does any one have a clutch puller for a 200a and 444 i also need toe clips for the skis and a manual for a 200a also i need a flyweel puller for a 200a my friend dan the man needs some center bonded rubbers for his motor mount any help would be great

[fap67]

Here is a link to a flywheel puller that works on the JLO L152 engine in the 200/200A's http://www.denniskirk.com/jsp/product_c ... Id=p282035
Or go to Google and search for a flywheel puller 30mm x 1.5 internal.
When I pulled the clutch off of my 200A, I used a 7/8" coarse thread tap and threaded the "stem" of the clutch. I then used a 7/8" bolt and short piece of roundstock to remove the clutch. This was on an all steel clutch on an early 200A, I've never removed the kind with the aluminum cover, so I don't know if the threading trick will work or not on these kinds.

[Barrie2777]

I have both the center bonded motor mounts and the toe clips for the skiis. The motor mounts are $8 each for either the 148 or 252 motor mounts. A set of reproduction toe clips is $30.

[wallis1924]

hey barrie do you have a repo manual for a 200a

[wallis1924]

thanks fap67 for the info

[wallis1924]

barrie ill let dan know that you have the rubber mounts do you have paypal for a set of thoes toe clips also do you have a copy of a manual for a 200a

[Barrie2777]

I have the manual also. Please contact me at HUSSKI@bellnet.ca for all mailing arrangements.