Page 1 of 1
Motor mounts
Posted: Fri Mar 14, 2008 1:31 am
by matt collins
How thick are the motor mounts? Mine are completely gone. I think I can match them up with something if I know the thickness.
Matt
Re: Motor mounts
Posted: Fri Mar 14, 2008 9:45 am
by cdnprairie
Hi Matt,
I think Bruce had indicated that the motor mounts were avaiable from Grainger, If you check on the site under 500 and 502 motors, there is a link to Grainger. Ken
Re: Motor mounts
Posted: Fri Mar 14, 2008 4:55 pm
by Go Go Diablo
Excellent! See, I don't even need to be around. Lots of people have the answers. Thanks for helping Ken.
On the site is information from Grainger and McMaster Carr. You can get the size of the mounts on-line and order them too.
Bruce
Re: Motor mounts
Posted: Sun Mar 16, 2008 8:22 pm
by Barrie2777
The motor mounts for Diablos are called sandwich mounts and are sold by many firms including LORD Corporation in the uS and RPM mechanical in Burlington, Ontario. I have bought several sets with the only difference being that the protruding threaded bolt is 3/8" and not 5/16". This is a simple problem. I also believe that the new mounts may have a higher pound rating than the old ones...the rubber is harder.