Use this area to have discussions and swap information regarding Diablos or Hus Skis!
-
Go Go Diablo
- Site Admin
- Posts:1832
- Joined:Fri Feb 22, 2008 12:47 am
- Location:Sobieski, Wisconsin
-
Contact:
Post
by Go Go Diablo » Thu Jan 10, 2013 11:33 pm
Here is my 2 cents.
I don't get fancy. I use regular unleaded gas. Our gas has 10% ethanol. Go to the local Fleet Farm and get a simple 2-cycle oil for air cooled engines. I mix it at 24:1.
With it, I've never had a problem.
Bruce
Too many Diablos and parts to count.
Yamaha 600 SX
-
swen
- Posts:35
- Joined:Sat Aug 27, 2011 5:42 pm
Post
by swen » Fri Jan 11, 2013 5:17 pm
Is that a proper sniglet ratio?

-
Vintage srx
- Posts:27
- Joined:Thu Jan 31, 2013 12:30 pm
Post
by Vintage srx » Thu Feb 21, 2013 11:36 pm
I gotta side with Barrie , 32/ 1 mix ratio with high test gas , I burn the same fuel mix as in my race yamaha's And have NEVER lost a motor , 9.00 dollars a gallon for the gas and I use yamalube 2-R oil which is 7.00 dollars a pint . Back in the day they had Real Gas with lead in it and these motors where designed to run on that . There's so many great oils available now days but I'm a yamaha guy and go my own way with yamalube 2-R
444 Hus-Ski (restored)
444 Hus-Ski (original)
76 Yamaha Srx 440
77 Yamaha Srx 440
79 Yamaha Srx 440
81 Yamaha Srx 440
98 Yamaha Srx 600
-
samboni
- Posts:6
- Joined:Sat Nov 09, 2013 7:37 am
Post
by samboni » Thu Jan 09, 2014 2:46 pm
I like to run 24-1 good 2cycle oil and a ethanol free premium works great also put a primer on both 502's, Two pumps on primer what ever temp starts on first pull, a real recoil saver.