200
- snocatpete
- Posts:376
- Joined:Sun Feb 07, 2010 8:39 pm
engine installed, wires connected, throttle linkage connected, choke cable connected. Also headlight installed and wired and new engine hood bumpers installed and engine hood installed.
- Attachments
-
- IMG_0274.jpg (32.95KiB)Viewed 7824 times
-
- IMG_0275.jpg (32.08KiB)Viewed 7824 times
-
- IMG_0272.jpg (31.13KiB)Viewed 7824 times
- snocatpete
- Posts:376
- Joined:Sun Feb 07, 2010 8:39 pm
Re: 200
Installing the brand new tracks
- Attachments
-
- IMG_0277.jpg (44.71KiB)Viewed 7824 times
-
- IMG_0278.jpg (49.97KiB)Viewed 7824 times
-
- IMG_0279.jpg (34.36KiB)Viewed 7824 times
- snocatpete
- Posts:376
- Joined:Sun Feb 07, 2010 8:39 pm
Re: 200
Assembling the ski seater
- Attachments
-
- IMG_0283.jpg (37.6KiB)Viewed 7805 times
-
- IMG_0284.jpg (58.85KiB)Viewed 7805 times
-
- IMG_0285.jpg (39.66KiB)Viewed 7805 times
- snocatpete
- Posts:376
- Joined:Sun Feb 07, 2010 8:39 pm
Re: 200
NOS skis are installed, new reproduction seat is installed, wiring is complete and the ski seater is ready to go.
- Attachments
-
- IMG_0297.jpg (31.69KiB)Viewed 7805 times
-
- IMG_0287.jpg (31.79KiB)Viewed 7805 times
- snocatpete
- Posts:376
- Joined:Sun Feb 07, 2010 8:39 pm
Re: 200
I forgot to post this picture earlier so I am posting it now. What I wanted to show is this reproduction throttle handle that I got from Barrie. Looks awesome and works awesome.
- Attachments
-
- IMG_0276.jpg (26.11KiB)Viewed 7805 times
- Cory Moffat
- Posts:45
- Joined:Wed Jan 04, 2012 3:08 pm
- Location:Prince George BC Canada
Re: 200
Nice Job. What are you going to use for a Connector on the tail light wire?
The quick Disconnect between the Seater to Track unit.
Got any leads for the original type connector? I could not find anything like the original.
The quick Disconnect between the Seater to Track unit.
Got any leads for the original type connector? I could not find anything like the original.
- snocatpete
- Posts:376
- Joined:Sun Feb 07, 2010 8:39 pm
Re: 200
Hi Corey
To the best of my knowledge the original connection between the ski seater and the tractor was just a simple quick disconnect type connecter with a rubberized plastic protective cover. The protective covering is a rubberized plastic that stays soft and pliable this I believe was what was originally used it is NOT shrink tube.
The quick connecter that I use is a brass non-insulated type that crimps both the bare wire and the insulation which I believe is similar to the original.
The part number for a Hus-ski 200 is H-965. This number also crosses over to a 444 and a 600 part number and I believe it was the same part used on the Diablo Rouge??
Maybe somebody on the forum following this thread can elaborate a bit more about this topic.
Hopefully this helps.
To the best of my knowledge the original connection between the ski seater and the tractor was just a simple quick disconnect type connecter with a rubberized plastic protective cover. The protective covering is a rubberized plastic that stays soft and pliable this I believe was what was originally used it is NOT shrink tube.
The quick connecter that I use is a brass non-insulated type that crimps both the bare wire and the insulation which I believe is similar to the original.
The part number for a Hus-ski 200 is H-965. This number also crosses over to a 444 and a 600 part number and I believe it was the same part used on the Diablo Rouge??
Maybe somebody on the forum following this thread can elaborate a bit more about this topic.
Hopefully this helps.
- Attachments
-
- IMG_0374.jpg (15.18KiB)Viewed 7787 times
-
- IMG_0375.jpg (13.52KiB)Viewed 7787 times
-
- IMG_0381.jpg (24.71KiB)Viewed 7787 times
- snocatpete
- Posts:376
- Joined:Sun Feb 07, 2010 8:39 pm
Re: 200
This is taken out of Hus-ski manuals showing the part number and the interchange part numbers.
- Attachments
-
- IMG_0376.jpg (27.55KiB)Viewed 7787 times
-
- IMG_0377.jpg (20.74KiB)Viewed 7787 times
- snocatpete
- Posts:376
- Joined:Sun Feb 07, 2010 8:39 pm
Re: 200
Just to refresh, this is what this Hus-ski looked like when I first bought it.
- Attachments
-
- IMG_2459.JPG (43.21KiB)Viewed 7764 times
-
- IMG_2457.JPG (37.87KiB)Viewed 7764 times
- snocatpete
- Posts:376
- Joined:Sun Feb 07, 2010 8:39 pm
Re: 200
it was in pretty rough condition but a perfect candidate for a restoration.
- Attachments
-
- IMG_2433.JPG (47.69KiB)Viewed 7764 times
-
- IMG_2460.JPG (44.19KiB)Viewed 7764 times