400 restoration project

These posts document restoration experiences of our members
User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec
Re: 400 restoration project

Post by Barrie2777 » Thu Sep 03, 2020 5:55 am

20200902_112435-600x800.jpg
20200902_112435-600x800.jpg (128.73KiB)Viewed 7099 times
The 400 is the only model with a 1-1/2" x 1-1/2" angle iron to reinforce the fender at tge rear lift handles.

User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec

Re: 400 restoration project

Post by Barrie2777 » Sat Sep 05, 2020 3:22 pm

PhotoPictureResizer_200905_161432125-800x600.jpg
PhotoPictureResizer_200905_161432125-800x600.jpg (104.06KiB)Viewed 7091 times
Back together

User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec

Re: 400 restoration project

Post by Barrie2777 » Mon Oct 26, 2020 2:39 pm

20201025_161133-600x800.jpg
Hood latch hook
20201025_161133-600x800.jpg (57.88KiB)Viewed 7008 times
20201025_161109-600x800.jpg
Belt tightening blocks
20201025_161109-600x800.jpg (89.56KiB)Viewed 7008 times
I had to add the hood latch hook which holds the cast aluninum latch in place.

The belt tightening blocks are also unique to the model 400.

Post Reply