Does anyone know if the rubber bushings that are on the motor mounts to the frame are available off the shelf somewhere? of any for sale. Have a friend that restoring a 200 a and would like to get some. I told him would check with the experts..... you guys.
Ron
Ron@pedist.com
Search found 43 matches
- Tue Apr 28, 2015 10:20 am
- Forum: Questions & Discussions about Hus Skis
- Topic: 200a rubber motor mounts
- Replies: 2
- Views: 5014
- Mon Feb 06, 2012 2:49 pm
- Forum: Questions & Discussions about Hus Skis
- Topic: FYI hus-ski
- Replies: 3
- Views: 3666
FYI hus-ski
FYI..... mfg supply. com has brake calipers and pads for 444 also bands and drums for 200a for those who want to restore their brakes, GEM machine, my machinist friend is making some splined 9 tooth gears and brake rotors. If anyone wants one, will let you know when done, you can buy from him. He al...
- Mon Feb 06, 2012 2:22 pm
- Forum: Questions & Discussions about Hus Skis
- Topic: Ski Finish
- Replies: 2
- Views: 3153
Re: Ski Finish
marine Spar "varnish" polyurethane would be the closest to original that will withstand water abuse. Clear polyamide 2 component epoxy would be the alternate to a fiberglass finish, same category, and would keep that natural wood appearance. Thin the first coat so it goes in the fibers and strengthe...
- Wed Jan 25, 2012 8:08 pm
- Forum: Questions & Discussions about Hus Skis
- Topic: 600 dual carb
- Replies: 1
- Views: 2339
600 dual carb
Barry, I picked up a 600... not that I need more hus-ski's. One reason I took it has dual carbs and extra cab louver that all look factory. Have you seen any 252 with dual carb setup. Could this have been a factory setup of one the hus-ki factoy guys as the factory always wants something out of the ...
- Tue Mar 01, 2011 8:20 pm
- Forum: Daily Chatting
- Topic: 2/23/11 Deep Snow Chat
- Replies: 5
- Views: 3935
Re: 2/23/11 Deep Snow Chat
BRUCE THAT PICT HAS GONE AROUND THE WORLD... THEY MUST DRIVE ON THE WRONG SIDE IN SOUTH DAKOTA.. HAS A WARM TRIP...RON
- Tue Feb 22, 2011 9:10 pm
- Forum: Hus Ski and Diablo Restorations
- Topic: No Time To Waste! 444 for Feb 12th!Get Set Go !
- Replies: 93
- Views: 85694
Re: No Time To Waste! 444 for Feb 12th!Get Set Go !
The 400 has an extra v strip welded under the pan along each side.. inline with the top bead...Have not see that on the 444s
- Tue Jan 11, 2011 7:59 pm
- Forum: Questions & Discussions about Hus Skis
- Topic: RUBBER HOOD CUSHIONS
- Replies: 8
- Views: 5988
Re: RUBBER HOOD CUSHIONS
HOOD BUMPERS & THE SPRING LOADED HOOK LATCHES ARE CHEAP AT MAC'S ANTIQUE AUTO PARTS.. ONLINE OR CATALOG
- Tue Apr 06, 2010 7:16 pm
- Forum: General Discussion
- Topic: Blasting and primer on 200A?
- Replies: 7
- Views: 5482
Re: Blasting and primer on 200A?
ALSO BARRIE SINCE THESE 2 COMPONENT PRODUCTS CURE THRU CHEMICAL REACTION VS. AIR DRY. THE ONE THING THAT STOPS THE "CURING " PROCESS IS TEMP. FOR AN EXAMPLE IF YOU TAKE STANDARD EPOXY WHICH HAS TO HAVE A "SURFACE TEMP"NOT AIR TEMP OF 55 DEGRESS MIN TO CURE PROPERLY, AND YOU WOULD PUT IT IN THE FRIDG...
- Tue Apr 06, 2010 7:01 pm
- Forum: General Discussion
- Topic: Blasting and primer on 200A?
- Replies: 7
- Views: 5482
Re: Blasting and primer on 200A?
THE DUPONT IMRON SHOULD HAVE BEEN DRY TO HANDLE IN 6-7 HOURS UNLESS YOU DID NOT MIX IT PROPERLY. (POLYAMIDE EPOXY'S WILL HAVE A 30 MIN INDUCTION TIME BEFORE USE.) THERE IS NO INDUCTION TIME WITH MOST URETHANES. MIX PROPERLY AND WELL SCRAPE THE SIDE AND BOTTOM IF MIXING BY HAND... MANY ARE 6:1 RATIO....
- Tue Mar 30, 2010 7:26 pm
- Forum: General Discussion
- Topic: Blasting and primer on 200A?
- Replies: 7
- Views: 5482
Re: Blasting and primer on 200A?
I AGREE WITH BARRIE ON THE SANBLASTING YOU NEED 10-12CFM TO BLAST PROPERLY. WE BUILT A BLAST CABINET OUT OF PLYWOOD & KEMLITE 8FT LONG BY 4FT WIDE 6 HIGH. I WILL TAKE A PICT TO SHOW YOU. ANY PIECE WILL FIT IN IT. AS FAR AS PRIMER. IF YOU USE EPOXY , A TRUE 2 COMPONENT POLYAMIDE OR POLYAMINE. I WOULD...