Bolens Diablo Rouge and Hus Ski Discussion Forums

i have had same thng as barry split down the middle and gone

i am a little late but ed is right,,,, there is a commercial bit used by convayer belt people and it does drill to size in ontario some one like RW hamilton has them unlike hole punches they have a very thin side wall and lots of the big quarry and mining belts are 2 inches thick so they cant drive ...

so how do you put 2 full size snow mobiles in the back of a pick up truck and close the tailgate,,,,,, no one with a ski-doo can do it this way

thanks guys i think i got it but edit is first on mine .......was only a little confusion

how do you shrink the pic,s to fit in here???????????? duhhhhhhhhhhh lol

Geez guys, I know some of you out there have techniques to share. hope i am doing this right well it depends on how dirty it is to start and is it still assembled or not ,,, if not take it to a big truck wash have them acid spray it then home it goes and if its still hazy i took 3M pads cut them in...

Thought you might ask...Spaenaur RVT247 1/4" x 1-1/8" long. The rivetting worked great with the air gun and rivetting attachment. The most time spent was inserting the rivets with washers through the rubber. The rivets look soooo gooood not to mention all that stainless steel. how heavy a buckin ba...

wallis1924 wrote:i will keep you in mind thanks for the info jeff

i hope this is in the right place,,,,, jeff is right take it out you will need V blocks,,,a hydraulic press and a dial indicator
and dont use heat

huuksnatch wrote:You actually should be looking for a gates 6013. The demensions to that are 29 32's" wide (23mm) and 36 3/4" long (933mm). The gates 6013 is still available from any gates distributor, and works great on all my 444's.

nappa has the same # or salsbury 702695