Next 444 Project

These posts document restoration experiences of our members
User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm
Next 444 Project

Post by snocatpete » Sat May 07, 2016 7:28 pm

Hi All
So this is where I am at. I was going to start this project early last fall but did not get started until my Christmas break from work!
I started by power washing everything to get the top layer of 50 year old grease, grime and dirt off of it. Next into the shop for a careful dismantling and preliminary inspection of all the parts. Then it was off to the welding shop where I repaired all cracks, filled in all the "after market drill holes" !! and
repaired all the sheet metal, repaired side screens and hood scoop screen which is usually damaged. I should mention I was going to just do one Hus ski but decided to do the other one at the same time. (twice as much fun!)

Also, at this time now I have also overhauled both engines, clutches, jack shaft, track sprockets (or as Hus ski calls them - front and rear wheel) and both axles are done too. The new skis are tripled coat varnished and new runners are painted and installed.

After all the welding and sheet metal has been hammer and dolly back straight again, I reassembled to check fit of all parts and now I have to disassemble it again and it is off to media blast to remove all the old paint and surface rust and temporary primer and then back to the paint booth for a nice new coat of epoxy primer and a final top coat of Tropicalia Yellow.

I will give an update when I get more done later this spring/summer.
Attachments
IMG_2818.JPG
IMG_2818.JPG (118.57KiB)Viewed 8101 times
IMG_4125.JPG
IMG_4125.JPG (145.83KiB)Viewed 8101 times
IMG_4130.JPG
IMG_4130.JPG (153.15KiB)Viewed 8101 times

User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm

Re: Next 444 Project

Post by snocatpete » Sat May 07, 2016 7:33 pm

this is the disassembly part
Attachments
IMG_4256.JPG
IMG_4256.JPG (125.95KiB)Viewed 8099 times
IMG_4141.JPG
IMG_4141.JPG (136.69KiB)Viewed 8099 times
IMG_4140.JPG
IMG_4140.JPG (134.18KiB)Viewed 8099 times

User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm

Re: Next 444 Project

Post by snocatpete » Sat May 07, 2016 7:41 pm

in the welding shop
Attachments
IMG_4149.JPG
IMG_4149.JPG (133.25KiB)Viewed 8099 times
IMG_4146.JPG
IMG_4146.JPG (146.82KiB)Viewed 8099 times
IMG_4156.JPG
IMG_4156.JPG (114.27KiB)Viewed 8099 times

User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm

Re: Next 444 Project

Post by snocatpete » Sat May 07, 2016 7:44 pm

engine overhaul
Attachments
IMG_4310.JPG
IMG_4310.JPG (127.85KiB)Viewed 8099 times
IMG_4269.JPG
IMG_4269.JPG (113.17KiB)Viewed 8099 times
IMG_4266.JPG
IMG_4266.JPG (138.16KiB)Viewed 8099 times

User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm

Re: Next 444 Project

Post by snocatpete » Sat May 07, 2016 7:50 pm

So this is all I have done so far. Next it is off to media blast and paint and then reassembly and electrical and I still have tracks to rebuild so will post as I get more done.
Attachments
IMG_4756.JPG
IMG_4756.JPG (161.7KiB)Viewed 8099 times
IMG_4359.JPG
IMG_4359.JPG (135.2KiB)Viewed 8099 times
IMG_4237.JPG
IMG_4237.JPG (129.62KiB)Viewed 8099 times

BillNH
Posts:100
Joined:Tue May 12, 2009 6:54 pm
Location:Charlestown, NH

Re: Next 444 Project

Post by BillNH » Sun May 08, 2016 5:50 am

Looking good.
Bill, 503 Diablo Rouge, 444 mongrel. 2009 Arctic Cat 570

User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm

Re: Next 444 Project

Post by snocatpete » Thu Jun 23, 2016 11:39 am

hi Bruce - read your posting this morning and ironically I was just thinking of posting an update on my progress as I was working on the 444 just yesterday. It was such a beautiful day I spent the morning in the sandblasting yard and got all the parts for both 444s blasted. In the afternoon, I decided to get the parts primed in the outdoor spray booth lol. Next I have to prep the primer with the final sanding and a wipe down with reducer then I can go ahead and give the final top coat of Hus ski yellow and black. Then I will be on to building tracks and the final assembly.
Attachments
IMG_5031.JPG
IMG_5031.JPG (49.82KiB)Viewed 8030 times
016.JPG
016.JPG (151.2KiB)Viewed 8030 times
012.JPG
012.JPG (151.7KiB)Viewed 8030 times

User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm

Re: Next 444 Project

Post by snocatpete » Thu Jun 23, 2016 11:41 am

some additional pictures of sandblasting and priming
Attachments
IMG_5069.JPG
IMG_5069.JPG (51.32KiB)Viewed 8030 times
IMG_5067.JPG
IMG_5067.JPG (44.48KiB)Viewed 8030 times
IMG_5043.JPG
IMG_5043.JPG (38.34KiB)Viewed 8030 times

User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm

Re: Next 444 Project

Post by snocatpete » Sat Jul 16, 2016 11:25 pm

Here are some updated photos. All the priming and painting is now done and it is time to start assembling then on to track building.
Attachments
IMG_5194.JPG
IMG_5194.JPG (41.38KiB)Viewed 7983 times
IMG_5192.JPG
IMG_5192.JPG (40.76KiB)Viewed 7983 times

User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm

Re: Next 444 Project

Post by snocatpete » Sat Jul 16, 2016 11:29 pm

In these photos, I am repairing the ski seater tail light and polishing the headlight bezel, ready for installation.
Attachments
IMG_5331.JPG
IMG_5331.JPG (50.92KiB)Viewed 7983 times
IMG_5272.JPG
IMG_5272.JPG (48.14KiB)Viewed 7983 times

Post Reply