need hus ski parts

A place to ask all your questions about Hus Skis or just a great place to spread a little of that Yellow Pride.
Post Reply
wallis1924
Posts:73
Joined:Mon Dec 01, 2008 11:58 am
need hus ski parts

Post by wallis1924 » Mon Apr 04, 2011 6:56 pm

hi does any one have a clutch puller for a 200a and 444 i also need toe clips for the skis and a manual for a 200a also i need a flyweel puller for a 200a my friend dan the man needs some center bonded rubbers for his motor mount any help would be great :)

User avatar
fap67
Posts:223
Joined:Tue Oct 06, 2009 5:02 pm

Re: need hus ski parts

Post by fap67 » Mon Apr 04, 2011 9:01 pm

Here is a link to a flywheel puller that works on the JLO L152 engine in the 200/200A's http://www.denniskirk.com/jsp/product_c ... Id=p282035
Or go to Google and search for a flywheel puller 30mm x 1.5 internal.
When I pulled the clutch off of my 200A, I used a 7/8" coarse thread tap and threaded the "stem" of the clutch. I then used a 7/8" bolt and short piece of roundstock to remove the clutch. This was on an all steel clutch on an early 200A, I've never removed the kind with the aluminum cover, so I don't know if the threading trick will work or not on these kinds.

User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec

Re: need hus ski parts

Post by Barrie2777 » Mon Apr 04, 2011 10:05 pm

I have both the center bonded motor mounts and the toe clips for the skiis. The motor mounts are $8 each for either the 148 or 252 motor mounts. A set of reproduction toe clips is $30.

wallis1924
Posts:73
Joined:Mon Dec 01, 2008 11:58 am

Re: need hus ski parts

Post by wallis1924 » Mon Apr 04, 2011 10:10 pm

hey barrie do you have a repo manual for a 200a

wallis1924
Posts:73
Joined:Mon Dec 01, 2008 11:58 am

Re: need hus ski parts

Post by wallis1924 » Mon Apr 04, 2011 10:23 pm

thanks fap67 for the info :)

wallis1924
Posts:73
Joined:Mon Dec 01, 2008 11:58 am

Re: need hus ski parts

Post by wallis1924 » Mon Apr 04, 2011 10:28 pm

barrie ill let dan know that you have the rubber mounts do you have paypal for a set of thoes toe clips also do you have a copy of a manual for a 200a

User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec

Re: need hus ski parts

Post by Barrie2777 » Tue Apr 05, 2011 8:59 am

I have the manual also. Please contact me at HUSSKI@bellnet.ca for all mailing arrangements.

Post Reply