Wiring issues

A place to ask all your questions about Hus Skis or just a great place to spread a little of that Yellow Pride.
Post Reply
Petersnow
Posts:1
Joined:Mon Mar 08, 2021 10:20 pm
Wiring issues

Post by Petersnow » Tue Dec 07, 2021 9:47 pm

Just starting a 200A restoration. I could use some direction with the wiring.
This sled runs but has no shut off or lights. Can't seem to find any info on line.
HELP ?

User avatar
Go Go Diablo
Site Admin
Posts:1830
Joined:Fri Feb 22, 2008 12:47 am
Location:Sobieski, Wisconsin
Contact:

Re: Wiring issues

Post by Go Go Diablo » Wed Dec 15, 2021 9:16 pm

The wiring on the 200 & 200A are fairly simple I think. You have two wires coming from the motor. One is the black wire connected to you kill switch on the motor which is also connected to the points. The other wire is the power from your lighting coil. The motor has no ground wire but the housing is grounded internally, so you need to connect a ground wire from the motor to the chassis and kill switch on the dash.

I use some 2-prong connectors at the motor, for the headlight and also the seater taillight so I can disconnect without cutting.

Does that help?
DSC06801.JPG
DSC06801.JPG (161.86KiB)Viewed 1196 times
Too many Diablos and parts to count.
Yamaha 600 SX

Post Reply