Page 1 of 1
Wiring issues
Posted: Tue Dec 07, 2021 9:47 pm
by Petersnow
Just starting a 200A restoration. I could use some direction with the wiring.
This sled runs but has no shut off or lights. Can't seem to find any info on line.
HELP ?
Re: Wiring issues
Posted: Wed Dec 15, 2021 9:16 pm
by Go Go Diablo
The wiring on the 200 & 200A are fairly simple I think. You have two wires coming from the motor. One is the black wire connected to you kill switch on the motor which is also connected to the points. The other wire is the power from your lighting coil. The motor has no ground wire but the housing is grounded internally, so you need to connect a ground wire from the motor to the chassis and kill switch on the dash.
I use some 2-prong connectors at the motor, for the headlight and also the seater taillight so I can disconnect without cutting.
Does that help?
- DSC06801.JPG (161.86KiB)Viewed 1353 times