A place to ask all your questions about Hus Skis or just a great place to spread a little of that Yellow Pride.
1 post •Page 1 of 1
Well, my 200a has no spark. I've done some troubleshooting but I was hoping you would let me know what your thoughts were before I order more parts. With the points opened I ohmed out the condenser to the body of the mounting plate and got 2 Ohms. I replaced the condenser thinking that must be bad (since resistance did not grow). With the new condenser it did the same thing. I de-soldered the ignition coil and ohmed it out. I get 5000 Ohms between the input wire (checked good) and the spark plug wire but I get 2 ohms between the coil input wire and the mounting plate (checked bad?). I think this means my coil has an internal short. Does this sound right? Thanks everyone!