hus-ski parts?

A place to ask all your questions about Hus Skis or just a great place to spread a little of that Yellow Pride.
Post Reply
User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm
hus-ski parts?

Post by snocatpete » Sat May 27, 2017 11:43 pm

A friend of mine had these parts mixed in with a lot of his Hus-ski parts and he wasn't sure if they were Hus-ski parts or not. He asked me to post them on the forum to see if anyone else could positively identify them. I went through all the literature I have and could not identify them. Any help would be appreciated. This first set of pictures are of a cable (he has quite a few of these cables). He thought they might be prototype cables used eiher for throttle or brake for a Hus-ski.
Attachments
IMG_0960.JPG
IMG_0960.JPG (69.2KiB)Viewed 2638 times
IMG_0961.JPG
IMG_0961.JPG (75.64KiB)Viewed 2638 times
IMG_0963.JPG
IMG_0963.JPG (90.99KiB)Viewed 2638 times

User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm

Re: hus-ski parts?

Post by snocatpete » Sat May 27, 2017 11:47 pm

This set of photos is of a bracket or set of brackets. Again he wasn't sure if this was a prototype part that was used on a Hus-ski itself or as a bracket of some sort to attach an accessory...?
Attachments
IMG_1158.JPG
IMG_1158.JPG (121.72KiB)Viewed 2637 times
IMG_1159.JPG
IMG_1159.JPG (93.36KiB)Viewed 2637 times
IMG_1160.JPG
IMG_1160.JPG (107.06KiB)Viewed 2637 times

User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm

Re: hus-ski parts?

Post by snocatpete » Sat May 27, 2017 11:58 pm

In this last set of photos are of some brackets that are attached to the ski mounting brackets. a couple of years ago I acquired a 444 sled that had these brackets mounted on them. Up until then I had never seen these particular brackets on any model of Hus-ski. I thought they were home-made brackets that someone had put on there as a stop to prevent the ski from pivoting too far. After going through all my parts books and literature that I have, I was unable to identify this part as a factory part. Then a few months ago, my friend gave me an old pair of skis and they had the exact same brackets that were on my 444 sled skis I had acquired a few years earlier. So now two sets of skis from two different sources, both with the identical bracket, these cannot be home made parts. I just thought I would share this here on the forum so if anyone can identify these parts or provide part numbers or part descriptions, my friend and I would appreciate it. Thanks, Pete
Attachments
IMG_1155.JPG
IMG_1155.JPG (131.48KiB)Viewed 2637 times
IMG_1154.JPG
IMG_1154.JPG (122.52KiB)Viewed 2637 times
IMG_0923.JPG
IMG_0923.JPG (126.96KiB)Viewed 2637 times

husskifan
Posts:98
Joined:Mon Jan 12, 2009 12:12 pm

Re: hus-ski parts?

Post by husskifan » Fri Jun 02, 2017 7:27 am

THE SKI BRACKETS THAT HAVE THE ADDED PIECE I HAVE SEEN BEFORE. I KNOW OF A HUS-SKI 444 THAT WAS A DEALER DEMO AND IS OF THE 652 SERIAL NUMBER SO ONE OF THE LATER UNITS AND IT IS ALL ORIGINAL AND HAS THESE ADDED PIECES.

Post Reply