HL carb to engine spacer plate

A place to ask all your questions about Hus Skis or just a great place to spread a little of that Yellow Pride.
Post Reply
Ballzo56
Posts:29
Joined:Mon Feb 06, 2017 10:26 am
HL carb to engine spacer plate

Post by Ballzo56 » Thu Feb 09, 2017 2:56 pm

Does anyone make a replacement spacer that goes between the JLO 252 and HL carb? It is fiber and one stud is pulling through.

User avatar
randys444
Posts:95
Joined:Fri Apr 22, 2016 6:43 pm

Re: HL carb to engine spacer plate

Post by randys444 » Mon Feb 13, 2017 9:31 pm

Have you had any luck finding a carb. spacer plate? If not I could make you one. You can look at the ones I have made on the restoration site,(Yellow Fever). I have had some people asking for them. I was waiting for some feedback from a couple I sold. All sounds good. I will be setting up to make a few more in a couple of weeks if you can wait a little while. I'm trying to get my 444 finished by the end of this month. Let me know Randy M.
Bring on the snow

Ballzo56
Posts:29
Joined:Mon Feb 06, 2017 10:26 am

Re: HL carb to engine spacer plate

Post by Ballzo56 » Mon Feb 20, 2017 4:40 pm

I took my spacer plate off and counter sunk the back side and screwed flat head machine screws through while using locktite. Worked well and got it running.

Post Reply