Keeps burning Plugs
I bought 2 spark plugs yesterday AB 7 for my machines. Put 50/1 gas and now plugs are burn out. There all black. Wen't for some rides yesterday and use for 2 to 3 hours that's it. What am I doing wrong here. I need those machines for March 1 cause I'm going in Cochrane for a vintage ride again.
Tks
Tks
Hus-ski 200A
65 Snowbug
73 Olympique 300
71 Snow Cruiser
196? Rat Hus-ski
65 Snowbug
73 Olympique 300
71 Snow Cruiser
196? Rat Hus-ski
- Barrie2777
- Posts:1547
- Joined:Tue Mar 04, 2008 9:17 pm
- Location:Arundel Quebec
Re: Keeps burning Plugs
A black plug says "too much gas"....lean down the mix. Your plug should be brown in color. If it is white then you may burn the piston.
Re: Keeps burning Plugs
Barrie if I have to much gas and not enough oil should I go at 25/1 or between 25 to 32 /1
Tks again
Tks again
Hus-ski 200A
65 Snowbug
73 Olympique 300
71 Snow Cruiser
196? Rat Hus-ski
65 Snowbug
73 Olympique 300
71 Snow Cruiser
196? Rat Hus-ski
- myoldhus-ski
- Posts:82
- Joined:Thu Jan 21, 2010 10:01 pm
- Location:Poplar Point Manitoba
Re: Keeps burning Plugs
Rock: Barrie is referring to your carb setting. You may have to tighten in the adjusting screw on your carb a little at a time. When you pulled the plug was it because the machine had quit or wasn't running right or because you wanted to look at the plug? If it was still running fine, carry a spare plug and go have fun. Jim
- Barrie2777
- Posts:1547
- Joined:Tue Mar 04, 2008 9:17 pm
- Location:Arundel Quebec
Re: Keeps burning Plugs
I mix at 32:1 using Castrol super snowmobile oil and high test gas. Which machine is this plug problem?
Re: Keeps burning Plugs
The plug is from the 200a and the 444. They both have the same mix 50/1 with a ab7. Going to put ab6 on the week-end and try it out
Hus-ski 200A
65 Snowbug
73 Olympique 300
71 Snow Cruiser
196? Rat Hus-ski
65 Snowbug
73 Olympique 300
71 Snow Cruiser
196? Rat Hus-ski
Re: Keeps burning Plugs
One problem I had burning up plugs was I did not have the little cover that bolts on top of the carb on. What was happening was when I would hit the powder snow was working its way into the carb and the machine would just quit. I would pull the plug and it would look fine, it would still have spark but would not start. I would put a new plug in and away I would go. Since I found the cover and put it back on I haven't gone through a plug in a couple of years. Just a thought.
Re: Keeps burning Plugs
I don't have that cover on my carbs. Hopefully I can find one
Hus-ski 200A
65 Snowbug
73 Olympique 300
71 Snow Cruiser
196? Rat Hus-ski
65 Snowbug
73 Olympique 300
71 Snow Cruiser
196? Rat Hus-ski