Crank Seal?

A place for all your Diablo Rouge Questions or just a place to shoot the bull about those little Red Devils.
User avatar
Rock
Posts:414
Joined:Sun Feb 24, 2008 8:00 am
Location:84 A Byng Ave Kapuskasing,Ontario P5N 1w8
Re: Crank Seal?

Post by Rock » Tue Feb 22, 2011 9:57 pm

My mistake it's 40 km all together. I've just retried the motor. The high gear is at 1 1/4 and the low is at almost 1/2 turn. I let it run for about 10 minutes and made a few adjustment. So far it runs good but i'll have to go for a ride around the block tomorrow . Last week i couldn't go more then 12mph

Barrie if this does'nt work i'm going to bring it to you very soon. LOL

Rock
Hus-ski 200A
65 Snowbug
73 Olympique 300
71 Snow Cruiser
196? Rat Hus-ski

User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec

Re: Crank Seal?

Post by Barrie2777 » Wed Feb 23, 2011 8:00 am

Be sure to pull your plug and check for a BROWN burn. Then you know it is set correctly.

User avatar
Rock
Posts:414
Joined:Sun Feb 24, 2008 8:00 am
Location:84 A Byng Ave Kapuskasing,Ontario P5N 1w8

Re: Crank Seal?

Post by Rock » Wed Feb 23, 2011 11:12 am

Well i wen't for a ride this morning. The first minute the motor was not running good at all. Press on the gas and it wanted to stop running so i had to play with the needles again. After a few attemps with the needles it wen't pretty good. After 20 minutes of driving around the house i look at the spark plug and still a bit of black on it. My guess is that the low needle is open to much . Will have to try it again tonight after work. I hope that i can make it run good for the ride on Saturday.

Rock
Hus-ski 200A
65 Snowbug
73 Olympique 300
71 Snow Cruiser
196? Rat Hus-ski

Post Reply