Restoring my 1962-3 Hus ski

Use this area to have discussions and swap information regarding Diablos or Hus Skis!
Post Reply
Tony
Posts:7
Joined:Thu Apr 19, 2012 4:57 am
Restoring my 1962-3 Hus ski

Post by Tony » Thu Dec 03, 2015 5:06 pm

Just getting started,and thanks for all the help, I am sure there will be many more questions. It is real big undertaking,but I got through it before. If you have a chance to go on you-tube and look up 1965 artic cat 450 d , was heading to a show in Fredericton at the time. Hope to have my Hus ski on you tube next, as soon as I get finished. Tony

Tony
Posts:7
Joined:Thu Apr 19, 2012 4:57 am

Re: Restoring my 1962-3 Hus ski

Post by Tony » Sun Dec 13, 2015 8:18 pm

Thanks for the site! Dose anybody know, the hight of the 1 X 3 tube ,that holds the front pulley and is welded to the side of square tubing that make up the lift handles on a 62-63 snow travelers.I need the measurement from the top of the handle bar tube, to the top of 1 X 3 tube not including arms the hold the pulley ? Thanks again, and hope someone knows. Tony

User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec

Re: Restoring my 1962-3 Hus ski

Post by Barrie2777 » Sun Dec 13, 2015 10:07 pm

The vertical distance to the top of the 3" tube is 5-3/4" on my machine. The arms to hold the jackshaft housing are flush with this top dimension. There is a great chance that if you measure another machine you will find a different dimension.

Tony
Posts:7
Joined:Thu Apr 19, 2012 4:57 am

Re: Restoring my 1962-3 Hus ski

Post by Tony » Tue Dec 15, 2015 9:20 pm

Thanks that help a lot. Tony

Post Reply