Building a hus-ski from scratch.

Use this area to have discussions and swap information regarding Diablos or Hus Skis!
User avatar
jeffrogers
Posts:37
Joined:Fri May 02, 2008 6:09 am
Location:Sudbury,ont
Re: Building a hus-ski from scratch.

Post by jeffrogers » Wed Jul 02, 2008 6:28 am

For the carb ice up. I will have to make a manifold to direct heat to the carb, this should solve the frezzing problen.

User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec

Re: Building a hus-ski from scratch.

Post by Barrie2777 » Wed Jul 02, 2008 4:49 pm

A motor from a snowblower probably has the proper cowling built into its design.

User avatar
jeffrogers
Posts:37
Joined:Fri May 02, 2008 6:09 am
Location:Sudbury,ont

Re: Building a hus-ski from scratch.

Post by jeffrogers » Thu Jul 03, 2008 12:53 pm

Now thats a good idea. Even built for winter. I should have tought that one up.

User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec

Re: Building a hus-ski from scratch.

Post by Barrie2777 » Thu Jul 03, 2008 7:53 pm

Yes, but now you are not going to use HONDA. Do they have motors on snowblowers?

Post Reply