Huski ski skag spacing and attach bracket

Use this area to have discussions and swap information regarding Diablos or Hus Skis!
alaskanbeef
Posts:3
Joined:Fri May 03, 2013 11:12 pm
Huski ski skag spacing and attach bracket

Post by alaskanbeef » Sat Nov 30, 2013 8:11 pm

I'm working on restoring a 200A for the wife and the project is coming together. The hope is that another piece of vintage iron will be hitting the trail soon. I am going to weld studs to the skags I purchased through Bruce but am not sure of where they should be. I plan on using 5/16" studs with brass acorn nuts on the topside. I did see some pics on the site of what appear to be original skis. This has been some help, but it would be nice to have actual dimensions to keep it configured correct.

The skis are set back too and I am not positive on where to mount the attaching bracket. I could take a guess, but that may not be right. I am thinking of using carriage bolts with acorn nuts on top to fasten it.

Thanks to all that keep Santa's favorite sleighs together.

Post Reply