model 600 restoration

These posts document restoration experiences of our members
User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec
Re: model 600 restoration

Post by Barrie2777 » Mon Sep 03, 2012 9:14 pm

It is regular body filler. It sticks to everything! I have used it on all my HUS-SKIs and the MG without delamination. I though it was called "polyester resin" but the label doesn't say what it is only that I shouldn't eat it , touch it , get it in my eyes etc etc....

User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec

Re: model 600 restoration

Post by Barrie2777 » Sat Sep 08, 2012 7:09 pm

Once the cracks were filled, they were sanded smooth. Several applications of filler were done because some areas were not filled completely on the first try. It is also hard to mix enough filler to apply in one application before it starts to harden. Be sure to remove sanding dust between each coat.
Attachments
cracks filled.jpg
cracks filled.jpg (130.21KiB)Viewed 6238 times
cracks sanded smooth 2.jpg
cracks sanded smooth 2.jpg (131.54KiB)Viewed 6238 times
cracks sanded smooth.jpg
cracks sanded smooth.jpg (128.93KiB)Viewed 6238 times

User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec

Re: model 600 restoration

Post by Barrie2777 » Sat Sep 08, 2012 7:14 pm

This was the decal on the side of this hood. It appears to be a jumping dog...perhaps a Husky?? This hood is very thin and definitely a single track hood because the is no "V" notches cut on the bottom edge. During the conversion from the single track base to the double track base "V" notches had to be cut to pass over the reinforcing ridges in the new base. This hood also does not have the top side vent. Top side vents were also a dealer installed change.
Attachments
decal on hood.jpg
decal on hood.jpg (137.83KiB)Viewed 6238 times

User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec

Re: model 600 restoration

Post by Barrie2777 » Sun Sep 09, 2012 6:54 am

Congratulations forum readers!!! 1000 views to this post. If you need a set of 600 decals, I will give to the first person to "post a reply" in this topic a complete set.

User avatar
fap67
Posts:223
Joined:Tue Oct 06, 2009 5:02 pm

Re: model 600 restoration

Post by fap67 » Sun Sep 09, 2012 7:52 am

I could use a set. Someday, I'll get around to restoring my 600. Like you, I'll have to learn about fiberglass repair.

User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec

Re: model 600 restoration

Post by Barrie2777 » Sun Sep 09, 2012 4:27 pm

Congrats Frank! I'll get a set off to you right away.

User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec

Re: model 600 restoration

Post by Barrie2777 » Sun Sep 09, 2012 5:02 pm

Today was a day for painting to parts which were ready. After applying the epoxy primer to the hood, I wet sanded it to remove a few problems I had during application. This allowed me to get a smoother base for the top coat. Sanding the primer revealled how uneven the gel coat was on this hood.
Attachments
sanded primer.jpg
sanded primer.jpg (138.64KiB)Viewed 6225 times
sanded primer 2.jpg
sanded primer 2.jpg (153.58KiB)Viewed 6225 times
a day in the paint room.jpg
a day in the paint room.jpg (146.77KiB)Viewed 6225 times

User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec

Re: model 600 restoration

Post by Barrie2777 » Sun Sep 09, 2012 6:53 pm

I have streamlined these restorations to this painting step by not finishing the fibreglass repair on two hoods. It took a lot of time to repair this hood and my patience to complete two more had expired. This is not as bad a four complete boggie stations for my Diablos but darn close. The other two models 600's will hopefully be completed this winter. The other pressing date is the upcoming Ste Jerome EXPOSNO where I had hoped to show a finished machine.....time is running out.
Attachments
after 1st coat.jpg
after 1st coat.jpg (142.28KiB)Viewed 6222 times

User avatar
fap67
Posts:223
Joined:Tue Oct 06, 2009 5:02 pm

Re: model 600 restoration

Post by fap67 » Sun Sep 09, 2012 7:12 pm

Barrie2777 wrote:Congrats Frank! I'll get a set off to you right away.
Thanks Barrie.

User avatar
Jano
Posts:105
Joined:Fri Dec 19, 2008 10:43 am
Location:Gatineau, Qc

Re: model 600 restoration

Post by Jano » Mon Sep 10, 2012 2:14 pm

Barrie,
From the pictures, seems that my visit got you going again on your restorations.

Looks like I might see you in St-Jerome with Pete and his sleigh. Working on it.

Jeannot

Post Reply