200

These posts document restoration experiences of our members
husskifan
Posts:98
Joined:Mon Jan 12, 2009 12:12 pm
FLUID FILM

Post by husskifan » Sun Jul 29, 2018 7:34 pm

I DO LOIKE FLUID FILM AND HAVE NEVER HEARD OF WURTH PRODUCTS I WILL CHECK THEM OUT THANKS

User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm

Re: 200

Post by snocatpete » Mon Aug 13, 2018 9:12 am

wurth is a big company they have every thing from nuts and bolts to paint "rattle cans" to tools and all kinds of chemicals. I have used many other products of theirs and been very happy with them!

User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm

Re: 200

Post by snocatpete » Mon Aug 13, 2018 9:47 am

the engine is in need of a complete disassemble and careful inspection. It does turn over and seems to have good compression the wiring is a typical mess and the muffler and bracket will need welding repairs. I start by removing the muffler, clutch and fan shroud
Attachments
IMG_4317.JPG
IMG_4317.JPG (37.59KiB)Viewed 4430 times
IMG_4320.JPG
IMG_4320.JPG (41.64KiB)Viewed 4430 times
IMG_4322.JPG
IMG_4322.JPG (40.26KiB)Viewed 4430 times

User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm

Re: 200

Post by snocatpete » Mon Aug 13, 2018 10:08 am

wiring mess, broken muffler and a mess on the engine from loose exhaust bolts and no exhaust gasket
Attachments
IMG_4318.JPG
IMG_4318.JPG (42.23KiB)Viewed 4430 times
IMG_4319.JPG
IMG_4319.JPG (36.14KiB)Viewed 4430 times
IMG_4322.JPG
IMG_4322.JPG (40.26KiB)Viewed 4430 times

User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm

Re: 200

Post by snocatpete » Mon Aug 13, 2018 11:00 am

removing the clutch is a standard procedure remove the bolt ,remove outer half ,remove inner half from crankshaft.
Attachments
IMG_4334.JPG
IMG_4334.JPG (39.84KiB)Viewed 4430 times
IMG_4335.JPG
IMG_4335.JPG (41.04KiB)Viewed 4430 times
IMG_4336.JPG
IMG_4336.JPG (37.2KiB)Viewed 4430 times

User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm

Re: 200

Post by snocatpete » Mon Aug 13, 2018 11:08 am

using this tool to remove inner half of clutch from CS
Attachments
IMG_4337.JPG
IMG_4337.JPG (41.14KiB)Viewed 4430 times
IMG_4339.JPG
IMG_4339.JPG (35.33KiB)Viewed 4430 times
IMG_4340.JPG
IMG_4340.JPG (43.09KiB)Viewed 4430 times

User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm

Re: 200

Post by snocatpete » Mon Aug 13, 2018 11:23 am

next I removed the fan shroud :shock: something like this left unchecked could cause a serious over heating problem especially in spring time with higher ambient air temps
Attachments
IMG_4341.JPG
IMG_4341.JPG (43KiB)Viewed 4430 times
IMG_4344.JPG
IMG_4344.JPG (44.4KiB)Viewed 4430 times
IMG_4345.JPG
IMG_4345.JPG (48.39KiB)Viewed 4430 times

User avatar
snocatpete
Posts:376
Joined:Sun Feb 07, 2010 8:39 pm

Re: 200

Post by snocatpete » Mon Aug 13, 2018 11:35 am

compressed air and blow gun cleaned all the stuff out of there ! next its finish disassembling and into the varsol bath for a good cleaning
Attachments
IMG_4343.JPG
IMG_4343.JPG (49.29KiB)Viewed 4430 times
IMG_4349.JPG
IMG_4349.JPG (48.67KiB)Viewed 4430 times

User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec

Re: 200

Post by Barrie2777 » Tue Aug 21, 2018 7:11 am

An important point about clutch removal is the clockwise rotation to undo the outer sheave. Too many guys try the anticlockwise rotation and strip those fine threads and invent a new problem.

User avatar
Barrie2777
Posts:1547
Joined:Tue Mar 04, 2008 9:17 pm
Location:Arundel Quebec

Re: 200

Post by Barrie2777 » Tue Aug 21, 2018 6:57 pm

Can you give more details of the use of the puller for the inner sheave? Inner sheavve removal is usually problematic.

Post Reply