200

These posts document restoration experiences of our members
User avatar
snocatpete
Posts: 369
Joined: Sun Feb 07, 2010 8:39 pm

Re: 200

Post by snocatpete » Wed Mar 04, 2020 11:49 pm

After shaping the stainless steel covers and varnishing the wood skid, I assembled the two pieces together and they are now ready to be installed at a later date.
Attachments
IMG_8536.jpg
IMG_8536.jpg (39.95 KiB) Viewed 294 times
IMG_8541.jpg
IMG_8541.jpg (43.89 KiB) Viewed 294 times
IMG_8542.jpg
IMG_8542.jpg (42.61 KiB) Viewed 294 times

User avatar
snocatpete
Posts: 369
Joined: Sun Feb 07, 2010 8:39 pm

Re: 200

Post by snocatpete » Sat May 09, 2020 11:27 am

Back in an earlier posting I said a new drive chain would be required. Fortunately since then I was able to acquire a NOS replacement drive chain hus ski part # 180-1689. And now I am debating if I should use it or just use a new high-quality diamond brand replacement chain. Because if I do use it, it will wear and wear out and eventually need to be replaced, then it’s gone forever or do I save it and use it as a display piece ? This is the ONLY time I’ve ever seen a hus ski NOS drive chain. But I guess I could ask the same question about the NOS skis i have for this restoration ...use them or save them??


I guess I will decide that when it’s time for final assembly ??
Attachments
IMG_9648.jpg
IMG_9648.jpg (26.59 KiB) Viewed 227 times
IMG_9650.jpg
IMG_9650.jpg (24.85 KiB) Viewed 227 times

User avatar
snocatpete
Posts: 369
Joined: Sun Feb 07, 2010 8:39 pm

Re: 200

Post by snocatpete » Sat May 09, 2020 11:30 am

This is a comparison between the original and the NOS
Attachments
IMG_9635.jpg
IMG_9635.jpg (37.66 KiB) Viewed 227 times
IMG_9638.jpg
IMG_9638.jpg (34.55 KiB) Viewed 227 times
IMG_9639.jpg
IMG_9639.jpg (43.32 KiB) Viewed 227 times

User avatar
snocatpete
Posts: 369
Joined: Sun Feb 07, 2010 8:39 pm

Re: 200

Post by snocatpete » Tue May 19, 2020 6:07 pm

The original tracks were completely worn out and there was no question that new ones would need to be built. Fortunately none of the steel channel cleats were missing as these would need to be removed and reused on the new ones. After the steel channel cleats were removed I gave them a thorough cleaning to get them down to bare metal and then a couple of coats of black paint . Next I had to cut, drill and varnish all the wood cleats, then pre-drill all the new rubber belting. Then it was time to start assembling the tracks. I use rivets and washers like the originals.

One thing I did differently from the original tracks is I used alligator type lacer clips rather than the original clipper type lacers. I did this for two reasons: 1 - I think they are a stronger design and 2 - I have the tools to install the alligator lacers.

It doesn’t matter what method you use, building or rebuilding Hus-ski tracks is a lot of work!
Attachments
IMG_8659.jpg
IMG_8659.jpg (40.53 KiB) Viewed 180 times
IMG_8657.jpg
IMG_8657.jpg (39.12 KiB) Viewed 180 times
IMG_8656.jpg
IMG_8656.jpg (39.31 KiB) Viewed 180 times

User avatar
snocatpete
Posts: 369
Joined: Sun Feb 07, 2010 8:39 pm

Re: 200

Post by snocatpete » Tue May 19, 2020 6:08 pm

removing and painting ice cleats
Attachments
IMG_9529.jpg
IMG_9529.jpg (40.37 KiB) Viewed 180 times
IMG_9533.jpg
IMG_9533.jpg (40 KiB) Viewed 180 times
IMG_9538.jpg
IMG_9538.jpg (31.53 KiB) Viewed 180 times

User avatar
snocatpete
Posts: 369
Joined: Sun Feb 07, 2010 8:39 pm

Re: 200

Post by snocatpete » Tue May 19, 2020 6:10 pm

Assembling tracks
Attachments
IMG_9547.jpg
IMG_9547.jpg (37.92 KiB) Viewed 180 times
IMG_9550.jpg
IMG_9550.jpg (43.43 KiB) Viewed 180 times
IMG_9552.jpg
IMG_9552.jpg (39.1 KiB) Viewed 180 times

User avatar
snocatpete
Posts: 369
Joined: Sun Feb 07, 2010 8:39 pm

Re: 200

Post by snocatpete » Tue May 19, 2020 6:11 pm

Installing lacer clips and brand new tracks
Attachments
IMG_9560.jpg
IMG_9560.jpg (46.58 KiB) Viewed 180 times
IMG_9561.jpg
IMG_9561.jpg (42.57 KiB) Viewed 180 times
IMG_9562.jpg
IMG_9562.jpg (40.38 KiB) Viewed 180 times

User avatar
myoldhus-ski
Posts: 75
Joined: Thu Jan 21, 2010 10:01 pm
Location: Poplar Point Manitoba

Re: 200

Post by myoldhus-ski » Tue May 19, 2020 10:01 pm

Aren't tracks fun!! I have a spare set built for my 600 and I hope I never need them. Jim

Post Reply